GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 84 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
ACT
A
CTL
B
ACT
A
CTL
B
ACT
A
CTL
B
ACT
A
CTL
B
84
Telemetry
Touch “ENT” icon on the right bottom then the designated position is marked with the red or
blue bar in the graph and the value of set position is displayed in POS. If you touch REVERSE
in “DIR” line, all setup is reversed. To set “ON” or “OFF” at the both end of stick operation
range, touch “SINGLE” icon to switch to “DUAL” then Prog.MIX function is on or off at the both
end of stick operation range. Touch “BACK” icon to return to the program mixing setup page.
After CTL setup, you need to adjust the program mix operation value. Since the throttle chan-
nel is designated to the master channel, the operation value is displayed in A and B. Touch
and activate the values in blue to adjust the value with “DEC” and “INC” buttons, the setup
value is displayed in graph. OFFSET X/Y can be set the same method and the setup value is
displayed as well.