GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 18 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
18
- RANGE TEST
“Range Test” function reduces the power output. This allows for a range test to confirm the RF
link is operating correctly. Perform a range check at the beginning of each flying session to
confirm system operation.
If the servo connected to receiver is operated normally within 50m or 70m of the distance from
the receiver, you may fly a model, if not, you need do range test again. If it doesn’t operate
normally even after the test, please send mz-12 for repair.
Touch “OFF” icon in “RANGE TEST” to change to “ON”, transmitter beeps indicating “Range
test” setup begins. This function is available for 99sec. you may touch “ON” icon if you want to
stop the function.
- DSC OUTPUT
It is used to set the number of channel when Trainer function is used with DSC jack. If 5
channels are used, PPM5 is recommended to use. To use more than 5 channels, choose the
appropriate PPM for each condition. PPM10, PPM16, PPM18, PPM24 are selectable.
Whenever you touch the value icon in DSC OUTPUT, You can select “PPM10”, “PPM16”,
“PPM18”, and “PPM 24” in turn. Default value is “PPM 10”.