GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 11 / 108

Check Check
Touch
Touch
Touch
Touch
Touch
Touch
Touch
11
1-4. EXT.M (External Model)
This function is used to copy the model in transmitter into SD Card. In order to use EXT.M
function, you need to plug SD Card into SD Card slot on the back of transmitter. When it is
plugged into the slot, “SD Card” icon is lightened in the transmitter main page. Touch Base
setup icon to call the base setup page. In the page, touch “Model Select” icon to call the
“Model Select” setup page and touch the source model to copy in transmitter then it is acti-
vated in blue. Touch “EXT.M” icon then the popup message “SD Card EXPORT?” appears.
Touch YES then “Please wait” message is displayed and a few seconds later, the model data
in transmitter is copied to SD Card now
1-5. RES(RESET)
It allows you to remove the selected models in model list. Refer to the example of Model 01
as shown below. At first, you need to select the desired model that you want to remove then
the model icon is activated in blue. “Please wait” message is popped up when you touch
“YES” icon. All the data of the corresponding model is removed within a few second.
YES
INITIALIZE
SURE
NO YES
MODEL
CHANGE
NO
Touch