GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 95 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
95
Touch
Flap mix Functions can be adjusted for each Q.LINK condition.
10. Flap sett (Airplane, Gilder)
This mixing allows that the aileron, flap and elevator setups are applied at the same time by
operating a switch.
Touch “Flap sett” icon to access to the “Flap sett” setup page. The first page is AILE setup
and you may access to FLAP and ELEV setup page by touching “NEXT” icon in the top right.
Touch “INH” icon in ACT line to switch to “ON” and touch “ON” in CTL line to call the “Select”
message popup. Move the switch or stick or volume with your choice then that switch or stick
or volume is designated as on/ off key and then the key direction setup page appears. You
may select ON or OFF by touching icons. When the key is moved to the direction of ON, the
function is operated. Touch “BACK” icon to the previous page then touch and activate the
values in blue and adjust them with “INC” and “DEC” buttons. After performing the program-
ming setup of AILE and FLAP and ELEV in turn, touch SERVO icon on the top right to call
SERVO page. You may check the setup value for Flap sett. When Tx and Ctl are set to DV1,
DV2, DV3, DV4, SL1, and SL2 in advance, the setup values are applied by operating “DV” or
“SL” while flying