GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 16 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
16
7. TX ctl
It consists of the multiple functions for a transmitter. It includes “BIND ON/OFF”, “TX OUT
SET”, “RF ON/OFF”, “RF TYPE”, “RANG TEST”, and “DSC OUTPUT” functions. Touch “TX
ctl” icon to call the “TX ctl” setup page.
- BIND ON/OFF
It is used to bind a transmitter to a receiver. In “TX ctl” setup page, turn on a receiver and
press “Setup” icon of a receiver for over 3 seconds until a receiver is entered the binding
mode. If you touch “Off” icon in “BIND ON/OFF” of “RX1” then the transmitter is bound to a
receiver in a few seconds and “OFF” of “RX1” is changed to the product name of the bound
receiver. “RF ON/OFF” is set to “ON” as well. Rx2 can be bound as the same as explained
above.