GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 65 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
65
Touch “SET” icon to activate the value in red and select the desired type with INC and DEC
buttons. Touch “SET” icon again to deactivate the value. Touch INC button to move the cursor
to “CH OUT TYPE” In order to set for CH OUT TYPE, touch “INC” icon to move the cursor to
CH OUT TYPE and then touch the “SET” icon. Now, “SAME” in CH OUT TYPE is activated in
a red. When it is activated, touch the INC or DEC icons to select the desirable receiver type
and then touch the “SET” icon to remove the cursor. The set type of receiver is activated.
When you select SUMO 8 and SUMD HD8 and try to select the different output channel,
touch “SET” icon to activate the channel number in red then select the desired channel with
INC and DEC buttons. Touch “SET” icon again to deactivate the value. Now, the selected
channel outputs PPM signal.
14-3. SENSOR SELECT
This function is used to program telemetry sensor that is connected to HoTT receiver.
You should select the sensor first to use and program the function such as voice function,
warning and the telemetry data information.
Touch “>>” icon in SENSOR SELECT line then RECEIVER, GENERAL MODULE, ELECTRIC
AIR, MOD, VARIO MODULE, GPS, and ESC are displayed. RECEIVER is set to ON, the
others are set to OFF by default.
To select the sensor, touch “OFF” icon to switch to “ON” then voice function, warning and
the telemetry data information are available. After the sensor selection is completed, touch
“BACK” icon to return to the previous page.