GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 42 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
42
Telemetry
Telemetry
8. S.Limt (Swash Limit)
It is used to have the channels of PITCH, AILE and ELEV
operated for the circle movement of the stick and the
channels of PITCH, AILE and EL have the travel limits
according to the circle setup size. Servo EPA should be
set over 100%, if the circle size is over 100%
9. S.MIX (Swash mixing)
S.MIX typically corrects swash plate timing issues by mixing AILE>>ELEV, ELEV>>AILE,
PITC>>AILE, PITC>>ELEV.
This function can be adjusted for each condition of Q.LINK.
AILE>>ELEV: It is used when a helicopter tends to be UP or DOWN while controlling aileron.
ELEV>>AILE: It is used when a helicopter tends to bank to left or right while controlling
elevator.
PITC >>AILE: It is used when a helicopter tends to bank to left or right while controlling pitch.
PITC >>ELEV: It is used when a helicopter tends to be UP or DOWN while controlling pitch.
In function page, touch “S.MIX” icon to call S.MIX setup page. Touch “INH” icon in ACT line to
switch to “ON” and touch >> icon to call the mixing setup page. Touch and activate the values
in LEFT and RIGHT line and adjust the mixing value with “INC” and “DEC” buttons. The pro-
grammed values are indicated in the left graph. The soft or rough movement can be adjusted
by touching the values in EXP line, (+) value will make it smoothly and (-) value will make it
roughly. You may watch the servo operation by touching “ SERVO” icon in the right top. Touch
“BACK” icon to return to S.MIX setup page. Now, you need to set CTL function. Touch “On”
icon to call “Select” message popup then move the switch with your choice then that switch is
designated as on/ off switch and then the switch direction setup page appears. You may select
ON or OFF by touching icons. When the switch is moved to the direction of ON, the function is
operated. Touch “BACK” icon to return to S.MIX setup page and confirm the setup data. Touch
“BACK” icon to return to FUNCTION page
The Swash rotation function in the bottom is used to
make the swash that mz-12 doesn’t support available by
rotating the swash angle
In the Function page, touch “S.Limit” icon to call “S.Limit”
setup page. Touch “INH” icon in “ACT” line to switch to
“ON” then the default value, 100% sized circle appears.
Now, touch “100%” icon in SET line to activate in blue. Adjust the cirvle size with “INC” and
“DEC” buttons. Touch “00’” icon in “Swash rotation” in the bottom to activate in blue then the
swash angle is set with “INC” and “DEC” buttons. Touch “BACK” icon to return to “FUNC-
TION” page.