GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 29 / 108

Touch
Hold
ldle-up1
ldle-up2
ldle-up3
Touch
Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
Touch
Touch
Hold
ldle-up1
ldle-up2
ldle-up3
Touch
Touch
Hold
ldle-up1
ldle-up2
ldle-up3
Touch
Touch Touch
29
1-2 NAM
It is used when to revise the name of “Q.LINK”. Touch the target value in “Q.LINK” to activate
in blue. Now touch “NAM” icon to call NAM setup page. In the page, enter the desired name
using the keypad. After that, touch “EN” icon then the revised name is displayed in “New
Q.LINK Name”. Now, touch “BACK” icon on the left top left to call “Q.LINK” setup page and
the revised name is stored at the corresponding Q.LINK.
1-3 CPY
CPY function is used to copy the preset Q.LINK setup data into another Q.LINK. Touch the
desired entry in “Q.LINK” line to activate in blue. Touch “CPY” icon to call “COPY” message
popup. Touch the entry in TARGET then all entry in TARGET are displayed in turn. Now,
select the desired Q.LINK entry and touch “YES” icon then the preset data is saved into the
selected Q.LINK entry and return to Q.LINK setup page.