GRAUPNER mz-24 HOTT, Руководство по эксплуатации

Страница: 28 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Hold
ldle-up1
ldle-up2
ldle-up3
Touch
Hold
ldle-up1
ldle-up2
ldle-up3
Hold
ldle-up1
ldle-up2
ldle-up3
Touch
Hold
ldle-up1
ldle-up2
ldle-up3
28
Telemetry
1. Q.LINK
This function is used to set Q.LINK and assign the corresponding switch to cope with the un-
expected trouble situation. Since the adjusted value is activated by moving the switch and you
can cope with the crisis with just one switch. It makes you operating the flight much easier.
Q.LINK for helicopter type consists of 6 types. (NORMAL, HOLD, IDEL UP1, IDEL UP2, IDEL
UP3, Q. link5 ) Normal type is set as a default value.
In the transmitter main page, touch “Function” icon to call the Function page and touch
“Q.LINK” icon to call Q.LINK setup page. Q.LINK list is displayed. “1.NORMAL” is the default
value and it cannot be changed.
1-1 NEW
This function is used when you wish to create new Q.LINK. If you may want to set for new
Q.LINK, touch the value in “Q.LINK” line to activate it in blue and touch “NEW” icon in the
right to call “CTRL” and “DELAY” options. In “CTRL” setup, touch “NULL” icon to call “Select”
message popup and move the switch or stick with your choice then the switch or stick is set to
Q.LINK switch. To set “DELAY” function, touch “0.0s” icon to activate in blue and set the delay
time with “INC” and “DEC” buttons. DELAY indicates the time till Q.LINK start to work after
Q.LINK is switched on
FUNCTION MENU (Helicopter)