4
Machine Features
Posiload Machine:
CONTROL POWER Switch
Provides power for the electrical circuitry in the console.
OFF:
Electrical power is not applied to the electrical circuitry and the internal white lamp is
dimmed.
ON:
Electrical power is applied to the electrical circuitry and the internal white lamp is
illuminated.
EMERGENCY STOP Button
When the EMERGENCY STOP button is pressed and released, all power is removed from the
machine. The pumps will immediately stop in place. The dispense valve will close.
Touch Panel
The Touch Panel is used to control all function on the machine. See the following sections for
operation of the different screens.
Foot Switch
The foot switch is used to initiate a pump cycle when operating in the SHOT or CONT pump
mode. Throughout this manual the foot switch will be referred to as the START device.
From the SHOT FLOW screen when the SHOT is pressed, and the START device is pressed and
released, the machine will cycle then stop and wait for the next start signal. If the START device
is pressed and held, the machine will run continuously.
Valves:
Check Valves
Check valves allow material to flow from the pumps to the material hoses but prevents material
from flowing back.
