21
EDIT RECIPE screen
The purpose of this screen is to allow changes of machine configurations or “Recipe” previously loaded
and save the machine configuration to memory.
To edit the values of a recipe in the EDIT RECIPE screen do the following:
(If you are at the Recipe Preview screen press the EDIT RECIPE button to get to the screen shown above)
1. Select a recipe value by touching the value the touch screen. A numeric keypad will appear.
2. Enter the new value that is required and press the
ENTER
button.
NOTE:
If you press the
UPDATE RECIPE VALUES FROM CONTROLLER
button, the current
recipe from the machine will reload into the EDIT RECIPE screen.
3. To load the edited recipe, press the
LEAVE EDIT
button. The PREVIEW RECIPE screen should
appear, then press the
SEND RECIPE TO CONTROLLER
button to load the recipe to the controller.
4. To save the edited recipe to disk; press the
SAVE RECIPE
button. This will make the SAVE RECIPE
screen to appear.
See SAVE RECIPE screen section of this manual for more information.
NOTE:
To escape the EDIT RECIPE screen press the
LEAVE EDIT
button.
To enable or disable the items of a recipe in the EDIT RECIPE screen do the following:
1. Select an item by touching the touch screen, the item that you touch will have a yellow rectangle around
the recipe (the item is located under the description along with the * if enabled).
2. To enable or disable an item (depending on the current configuration) press the RECIPE ITEM
ENABLE or RECIPE ITEM DISABLED button.
