11
PUMP PRESSURE screen
HIGH PRESSURE SET POINT indicator
This indicator shows the current material pump high-pressure set point setting. This setting was previously
preset in the PSI HIGH SET PT N7:40 in the CALIBRATION screen.
For more information on the HIGH
PRESSURE SETPOINT settings, see the CALIBRATION screen section of this manual.
ACTUAL MOLD PRESSURE indicator
This indicator shows the current material outlet hose and mold pressure.
LOW PRESSURE SET POINT indicator
This indicator show the current material pump low pressure set point setting. This setting was previously
preset in the PSI HIGH SET PT N7:42 in the CALIBRATION screen.
For more information on the HIGH
PRESSURE SETPOINT settings, see the CALIBRATION screen section of this manual.
HIGH MOLD PRESSURE PUMPING STOP message box
This indicator is illuminated when the material outlet hose and /or material mold pressure reaches the
HIGH PRESSURE SET POINT indicator setting. When indicator is activated, the material pump
servomotor is stopped.
For more information on the HIGH PRESSURE SHUTDOWN SETPOINT settings,
see the CALIBRATION screen section of this manual.
LOW MOLD PRESSURE PUMPING STOP message box
This indicator is illuminated when the material outlet hose and /or material mold pressure reaches the LOW
PRESSURE SET POINT indicator setting. When indicator is activated, the material pump servomotor is
restarted.
For more information on the LOW PRESSURE SETPOINT settings, see the CALIBRATION
screen section of this manual.
Sections only
shown if items
are installed
