Preliminary Device Description HG G-19600ZA | English, Revision 02 | Date: 13.03.2018
10
Chapter 3 – Mounting
3
Mounting
3.1 Magnetic Tape
For the operation of the magnet sensor HG G-19600ZA axially polarized magnetic band is
to be used. The direction of the polarization can be configured s. Figure 19 on page 26). The
polarization has to be identical for a whole facility.
Figure 4
Supported and unsupported magnetization of the magnetic tape
3.1.1 Magnetic Tape Types
Götting offers suitable magnetic tapes. Magnetic tape is sticked to the ground. Alternatively
embedded magnetic bar can be used that is layed in a groove cut into the ground. Götting
magnetic tapes always have the north pole on the top. The following elements are available:
3.1.2 Magnetic Tape Installation
The installation of both the magnetic tape and the embedded magnetic bar is specified in
a separately available document that you can download at the following address:
Link
http://goetting-agv.com/components/19600
Order no.
Description
Notes
HW MAT00003
Magnetic tape, self-adhesive, on a roll
W x H 50 x approx. 1,2 mm
Roll, length 15.2 m
HW MAT00004
Embedded magnetic bar, W X H 6 x 10 mm
quote length
HW MAT00005
Magnetic tape, self-adhesive curve segment
30
o
segment of circle, radius 600 mm
Curve segments
HW MAT00006
Magnetic tape, self-adhesive curve segment
30
o
segment of circle, radius 800 mm
HW MAT00007
Magnetic tape, self-adhesive curve segment
30
o
segment of circle, radius 1,000 mm
HW MAT00008
Magnetic junction, branch to the right, self-adhe-
sive, radius 1,000 mm
Junction segments
HW MAT00009
Magnetic junction, branch to the left, self-adhe-
sive, radius 1,000 mm
Table 1
Order numbers magnetic tape
(default)
(configurable)
multipolar magnetization
axial magnetization
axial magnetization
not OK
