manualshive.com logo in svg

Goldacres Super Cruiser G8, Руководство оператора, Страница: 93 / 210

Поделиться
Скачать
Goldacres Super Cruiser G8 Скачать руководство пользователя страница 93

Chapter 8 - Operation -

 89

G8 Super Cruiser Operator’s Manual MY19 - REV 0

EZ Control External Water 

Delivery Station

The external water delivery station allows several 

filling functions of the sprayer to be performed 

simultaneously. 

1.  With fresh water entering the system as per ‘Main 

Tank Fill’ instructions, ensure that all ball valves, 

including the ‘Main tank fill’ ball valve, on the 

external water delivery station are turned to OFF. 

2.  Turn the desired function ON by selecting the 

appropriate ball valve as labelled. 

3.  When the required amount of water has been 

transferred, turn the appropriate valve to OFF.

4.  When all functions have been performed, turn the 

fresh water pumping system OFF. 

Rinse Water Tank  Fill

The rinse water tank holds approximately 500 L. 

Make sure this tank always has sufficient water in it 

in case a chemical accident occurs and rinse water 
is needed to wash chemical from any contaminated 
persons, clothing or components.

To fill the rinse water tank from the fresh water 
supply via the quick-fill and fill station:

1.  Start by ensuring that all ball valves on the fill 

station are turned off.

2.  Lift the ‘Rinse tank fill’ red handle on the EZ 

control 3-way ball valve to the vertical position. 
This is the ON position.

3.  Connect the fresh water fill hose to the quick-fill 

coupling.

4.  Operate the fresh water pumping system (make 

sure pressure does not exceed 75 PSI). There 
should now be flow transferring to the rinse 

water tank.

5.  When the required amount of water has been 

transferred to the rinse water tank, stop the flow 

by turning off the external water supply and shut 

the rinse water tank fill valve by flipping it back 

down.

Tank Filling

Left: 

Remote fill 

3” inlet mounted 
to chassis on left 
hand side before 
front axle.

Right: 

Remote fill 

3” inlet mounted 
to right hand side 

Pod.

Remote Fill Points - 3”

There are two options for the 3” remote fill points. 

One is located on the front right hand side of the 

chassis just in front of the front axle. The other is 

located on the left hand side of the chassis and is 

mounted to the side of the Pod. 

These fill points go straight into the main tank, 
bypassing the control Pod, in doing so, the tank rinse 
and or rinse tank filling can not be operated when 
filling from these points.

The fill times are faster using these points and they 
give the option to remote fill from a Goldacres 
BatchMate unit with pre-mixed chemical straight into 

the main tank.

Содержание Super Cruiser G8



















































































































































































































Отзывы:

Нет отзывов