Goldacres Super Cruiser G8 Скачать руководство пользователя страница 188 | Manualshive

Страница: 188 / 210

Goldacres Super Cruiser G8 Скачать руководство пользователя страница 188

184

- Chapter 12 - Optional Accessories

G8 Super Cruiser Operator’s Manual MY19 - REV 0

Preface

The Groeneveld Automatic Greasing System
is cutting edge design encompassing robust
components and precision engineering to bring the
owner operator not only ease in operation and
maintenance but also peace of mind that all moving
systems are able to work at their peak.

To this end, Goldacres acknowledges that while we
hold a high degree of knowledge in their product, we
would always recommend that owners and dealers
contact their local Groeneveld dealer for technical
advice and assistance. We also advise that you use
only genuine Groeneveld parts and lubricants. After
all, this system is your investment in your machines
serviceability and longevity!

The information following, has been produced by
using excerpts from the Groeneveld EG0101 Zero
General Manual. Utilising text, tables and diagrams as
well as text and photographs supplied by Goldacres.

The following information about the auto greaser
system has been approved by Groeneveld.

Introduction

Groeneveld Automatic Greasing Systems ensure
the daily maintenance of the moving parts attached
to the system. They avoid unnecessary machinery
wear and down-time and thus save cost and prevent
exasperation.

Groeneveld greasing systems are used by production
companies, machinery used in service industries,
agriculture, shipping, the offshore industry and the
transport industry.

In the following list are the most important
advantages:

• Increase of the service intervals, thus less

unnecessary down-time;

• Less wear of the lubricated parts because of

accurate and constant lubricating;

• Reduced repair and replacement costs;

• Reduced unexpected down-time;

• Fewer production losses.

With a Single line Automatic Greasing System, all
attached lubrication points of a vehicle or machine
are automatically lubricated at the correct time with
the correct dose.

Moreover, optimum grease or lube-oil distribution
over the whole lubricating surface is achieved,
because the lubrication takes place while the
machinery or vehicle is in operation. Every action
is automatically carried out by the system. The user

needs only to refill the reservoir periodically.

Definitions

NOTE:

Is used to notify people of installation,

operation or maintenance information that is
important but not hazard related.

IMPORTANT:

Instructions that if ignored will cause

damage to the system or machine.

WARNING:

Instructions that if ignored will

cause personal injury or death to the operator or

bystanders.

Groeneveld Auto Greaser

«
...
186
187
188
189
190
...
»

Содержание Super Cruiser G8



















































































































































































































Отзывы:

Нет отзывов