manualshive.com logo in svg

Goldacres Super Cruiser G8, Руководство оператора, Страница: 66 / 210

Поделиться
Скачать
Goldacres Super Cruiser G8 Скачать руководство пользователя страница 66

62

 - Chapter 5 - Drivetrain

G8 Super Cruiser Operator’s Manual MY19 - REV 0

Transfer Case

The transfer case is a constant 4WD type. It is a 
single speed transfer case that directs drive from the 
transmission, to the front and rear axles. The transfer 
case has a centre differential lock that will split the 
drive 50/50 front to rear.

The differential lock is engaged from a switch located 
in the arm rest console in the cab. The switch 
activates a solenoid which sends air through a 6 
mm line, to the transfer case shift cylinder (see no. 3 
above). The shift cylinder is pushed in by the air and 
the differential lock is engaged. A light will illuminate 
on the differential lock switch when it is actually 

engaged and not just when the switch is activated.

When centre diff lock is turned off, air is released 
from the 6 mm line and a spring pushes the shift 
cylinder in the transfer case back out.

The air solenoid that switches the centre diff lock 
on and off is located on the chassis rail on the right 
hand side of the machine. 

For more information on the transfer case 
and solenoid, see Chapter 10 ‘Lubrication & 
Maintenance’.

NO.

FEATURE

1.

Input flange (From transmission)

2.

Output flange (To front diff)

3.

Drive split 50/50 - Engage/disengage - Shift cylinder air line 6 mm

4.

Output flange (To rear diff)

5.

Oil fill plug

6.

Oil drain plug

7.

Oil level plug

8.

Lock ring signal plug

1

2

3

8

4

5

6

7

Содержание Super Cruiser G8



















































































































































































































Отзывы:

Нет отзывов