manualshive.com logo in svg

Goldacres Super Cruiser G8, Руководство оператора, Страница: 89 / 210

Поделиться
Скачать
Goldacres Super Cruiser G8 Скачать руководство пользователя страница 89

Chapter 8 - Operation -

 85

G8 Super Cruiser Operator’s Manual MY19 - REV 0

Sprayer cabins can get pretty busy with the vast 
range of systems requiring individual control 

consoles. The ISOBUS standard brings all the systems 

together into the one display, called a universal 
terminal (UT). 

ISOBUS is an international standard communication 

system which links tractors and implements together, 
enabling data to be transferred quickly and simply. 

Essentially each system contains the brains, while 
the UT is simply the interface between the two. 
This means only one operator console is required. 
Numerous leading UT displays are supported with 
the Raven CR7 being one of them, and is available as 

optional fitment on these machines.  

Features like 3TS, pump speed readout, ultrasonic 
boom levelling plus sprayer steering tasks can all be 
monitored on the UT.

The ISOBUS system can be fitted with an optional 

6 section switch box which can be programmed to 
control the 16 sections in any combination of groups 
or individually.

Before using the ISOBUS system the following 

calibration values are required to accurately control 
product application:

•  Total width of implement

•  Number of sections & section widths

•  Control type

•  Meter Cal or spreader constant & product 

density

•  Valve type & Cal

•  Rate Cal

The Raven RCM is mounted to the rear of the 
boom centre section.

Please see Raven RCM operator’s manual for further 

information on calibration and setup.

ISOBUS System

Above: 

An optional Raven CR7 universal terminal 

(UT) can be fitted to interface with the RCM over 
the ISOBUS system fitted as standard to these ma

-

chines. Many other UTs by other manufacturers are 
also compatible to be used.

Above: 

An optional Raven 6 section control box can 

be programmed to control the 16 sections in any 
combination of groups or individually.

Содержание Super Cruiser G8



















































































































































































































Отзывы:

Нет отзывов