· 39
GLOBE RM410 PISTON AIR MOTOR MANUAL| INCLUDING AUXILIARIES | ATEX Certified
To comply according to ATEX please change the bearings after the operation hours according to the
table below
Maintenance brake
Check every 200 operating hours the thickness of the brake liner on the brake shoe (item 26).
Disconnect the brake and inspect the thickness of the liner. If the rivet heads which are holding the
shoes on the brake shoe assembly – item 26 – are within 0.5 mm of the surface new brake shoe
assemblies need to be fitted. Always replace both brakes shoes even if only one is worn.
After fitting the new brake shoe assemblies use the LOAD ADJUSTMENT procedure as mentioned in
the chapter OPERATION.
Brake
Description
Quantity
Expected/Rare
malfunction
Measures applied to prevent
the source becoming effective
Brake shoe assy
2
Wear of brake shoe
Check thickness brake liners
every 200 hours*
Output shaft
1
No grease
Check every 2500 hours*
All bearings
-
Worn/No grease
Replace every 5000 hours**
* Operating/running hours
** RM610: Replace after 4000 hours
Inspection and replacement interval of critical components
