26 · GLOBE RM410 PISTON AIR MOTOR MANUAL| INCLUDING AUXILIARIES | ATEX Certified
Cleaning silencer
If the silencer becomes dirty this will effect the
performance of the motor. To clean the silencer
follow the next procedure:
»
Disconnect airline
»
Remove the silencer
»
Clean the silencer
»
Lubricate the motor with 3-4 drops of oil
»
Connect the airline
»
Listen for changes in the sound of the
motor. If the motor runs fine, operation can
continue
»
If it is not running fine, you should install a
service kit.
Shutdown and long storage
»
You need to take care of the following proce-
dures for a proper shutdown.
»
Wear eye protection. Keep out of the air
steam.
»
Turn off the air supply.
»
Disconnect all air supply and vent all airlines.
»
Disconnect airlines.
»
Disassemble the air motor from its connection.
»
Remove the silencer.
»
Make sure you use clean and dry air to remo-
ve condensation from the inlet port.
»
Use a small amount of oil to lubricate the
motor.
»
Rotate the shaft by hand several times to
distribute the oil.
»
Cap or plug each port of the air motor.
»
Coat output shaft with oil or grease.
»
Store the air motor in a dry environment.
