PART THREE - OPERATION
SECTION 6 - TEST/MAINTENANCE
Model C53 Conductivity Analyzer (universal-mount 1/2 DIN)
Rev. 5-1000
78
☞
6.9 RESET DEFAULTS
(configuration settings
to factory-set values)
1.
With the
screen displayed, use
Ø
Ø
key
to select the “SIM SENSOR” line.
2.
Press
ENTER key
to display a screen like
.
NOTE:
Both analog output signals are now active.
They have a mA value that corresponds to the
measurement value shown on this screen. (The
relays, depending on their configured settings,
may also respond to this simulation value.)
3.
Use
arrow keys
to adjust the displayed simulation
value to the desired value.
4.
To end simulation and return to the TEST/MAINT top-
level menu screen, press
ESC key
or
ENTER key
.
You can conveniently reset stored configuration and cali-
bration settings, simultaneously to factory-set defaults (see
Table C).
1.
With the
screen displayed, use
Ø
Ø
key
to select the “RESET DEFAULTS” line.
2.
Press
ENTER key
to display the “RESET DEFAULTS:
ARE YOU SURE?” screen, asking if you really intend to
perform this extreme action. (If you want to abort this
action, press
ESC key
now.)
