7. INTEGRATION WITH THE BMS
INTRODUCTION
The VERTEX control units use the TCP version of the Modbus protocol. The service communicates at
the standard port
502.
The
Analog Input Registers
memory bank is used to store data on individual devices (luminaires,
sensors). The bank has 16-bit read-only registers.
The bytes of individual registers are stored in the
Little Endian
order.
The
Address
column shows the number of the initial register in which a given value is stored.
The
Number of Registers
field shows the data size expressed as 16-bit registers. If a register
includes more than one value (e.g. two 8-bit values), the whole register should be read and then the
value should be broken down into bytes according to the order used (Little Endian). Two values
packed to the same register will have the same address.
VERTEX REGISTERS MAP
Address
Number
of
Registers
Field name
Size (bits) Value Interpretation
0
2
IP
32
VERTEX IP address.
The first register includes two first address octets in the
reversed order (Little Endian), and the second the next
two octets.
2
2
Network Mask
32
VERTEX network mask. The first register includes two
first address octets in the reversed order (Little Endian),
and the second the next two octets.
4
2
DefaultGateway
32
VERTEX default gateway. The first register includes two
first address octets in the reversed order (Little Endian),
and the second the next two octets.
6
2
Dns1
32
Address of VERTEX
’s
basic DNS server. The first register
includes two first address octets in the reversed order
(Little Endian), and the second the next two octets.
8
2
Dns2
32
Address of VERTEX
’s additional DNS server
. The first
register includes two first address octets in the
reversed order (Little Endian), and the second the next
two octets.
10
4
UID
64
VERTEX ID number. Written as a decimal integer, e.g.
34585567102394561039
The bytes in the next registers are reversed (Little
Endian). The complete value is composed on four
registers.
14
1
VertexStatus
16
VERTEX status
Values:
15 - Reserved
14 - Reserved
13 - Reserved
12 - Reserved
11 - Reserved
10 - Error in input devices
9 - Error in the basic lighting devices
8 - Error in emergency lighting devices
7 - Reserved
6 - Reserved
5 - Reserved
4 - DALI bus error
3 - Communication with the DCASE system error
2 - Unconfigured work network
1 - FLASH internal memory error
0 - EEPROM internal memory error
48
Содержание Vertex PN8100102
Страница 1: ...OPERATION AND MAINTENANCE MANUAL ...
Страница 30: ...Example of DALI 2 sensor configuration motion sensor 32 ...
Страница 32: ...Example of VERTEX Action block configuration 1 2 3 34 ...
Страница 37: ...39 ...
