43
pH Flo
w C
ell
VERITY
®
1810 Conductivity and pH Monitor |
User’s Guide
VERITY® 1810 Monitor pH Calibration Utility
Before running samples for the first time, calibrate the pH sensor/flow cell using the
VERITY® 1810 Monitor pH Calibration Utility.
The VERITY® 1810 Monitor pH Calibration Utility is supplied on the Gilson Software USB, which is provided
with the pH flow cell.
Install the VERITY® 1810 Monitor pH Calibration Utility
PRE-INSTALLATION CHECKLIST
Before beginning the installation:
q
Log on as a Windows® Administrator
q
Close all running applications
q
Temporarily disable antivirus software
q
Temporarily disable firewall
INSTALLATION
The installation of the VERITY® 1810 Monitor pH Calibration Utility proceeds as follows:
1. Insert the USB into the drive and then run SETUP.EXE.
2. Install the VERITY® 1810 Monitor pH Calibration Utility. Follow the on-screen instructions.
●
If a User Account Control window appears, click
Yes
.
●
If prompted with a warning about installing driver software, select to “Install this driver software
anyway”.
The installation path on a Windows® 7 (32-bit) system is:
C:\Program Files\Gilson\Utilities\VERITY 1810 Conductivity and pH Monitor\pH Calibration Utility.
The installation path on a Windows® 10 or Windows® 7 (64-bit) system is:
C:\Program Files (x86)\Gilson\Utilities\VERITY 1810 Conductivity and pH Monitor\pH Calibration Utility.
Prepare to Run the
VERITY® 1810 Monitor pH Calibration Utility
1. Ensure that plumbing and electrical connections have been made as described in the
chapter.
For communication to occur, the instrument must be connected via a USB connection to the PC.
2. Obtain pH 7, pH 4, and pH 10 buffer solutions.
