Gilson VERITY 1810, Руководство пользователя

Страница: 41 / 46

41
pH Flo
w C
ell
VERITY
®
1810 Conductivity and pH Monitor | User’s Guide
Plumbing Connections
Tubing and fittings for inlet and outlet tubing connections are ordered separately so as to be appropriate for
the application flow rate. The arrows on the base indicate the flow path.
Tubing and Fittings
Flow Rate (mL/min) Part Number Description
0.5–5 49951059 TUBING,PEEK .010IDx.063OD 5FT
5–20 49952059 TUBING,.020"X 1/16 PEEK 5 FT. LONG,ORA
20–50 49953059 TUBING,.030" X 5FT, PEEK
>50 49954059 TUBING,.040" X 5FT, PEEK
All Flow Rates 49041034 FERRULE, 1/16" ANTI-TWIST, PEEK (P-250)
All Flow Rates 490410255 NUT, 1/16" ANTI TWIST PEEK (P-255)
To make the plumbing connections:
1. On each end of the tubing, slide the
nut, then the steel compression
ring, and then the ferrule. The
flattened end of the ring should face
towards the nut with the narrow
end of the ferrule towards the ring.
2. Insert the nut at each end into its
port. Hold the tubing to the bottom
of the fitting while tightening the
nut to finger tight.
Figure 19
Plumbing Connections
The flattened end of the
ring should face towards
the nut
The narrow
end of the
ferrule is to
touch the ring
Figure 20
Plumbing Connections
inlet
outlet