14
Technic
al Specific
ations
Introduction
| VERITY
®
1810 Conductivity and pH Monitor
Technical Specifications
Please be aware of the following before operating the instrument.
NOTICE
Changes or modifications to the instrument not expressly approved by Gilson could void
the factory-authorized warranty.
The instrument complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This instrument may not cause harmful interference, and (2) this instrument must accept any interference
received, including interference that may cause undesired operation.
Shielded cables must be used with the instrument to ensure compliance with the FCC Class A limits.
VERITY® 1810 Conductivity and pH Monitor
Technical
Specification
Definition
Analog Outputs
Two 0–1V dedicated analog outputs: one for streaming conductivity data and the other for
streaming pH data
Communication
USB
Conductivity
Flow Cell
Accuracy
± 4% or ± 20 µS/cm,whichever is greater,within 1 µS/cm–300 mS/cm at
25°C
Part Number
11000002
Pressure
psi
bar
MPa
200
13.79
1.38
Readable
Range
1 µS/cm–999.99 mS/cm
Specification
Range
1 µS/cm–300 mS/cm
Wetted
Materials
PEEK, Titanium
Volume
54.1 µL
Data Acquisition
2, 5, or 10 points/sec with TRILUTION® LC Software
Dimensions
(W x D x H)
13.4 x 10.3 x 7.1 cm (5.3 x 4.1 x 2.8 in.)
Environmental
Conditions
Indoor use
Altitude: up to 2000 m
Temperature range: 4°C–40°C
Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly
to 50% relative humidity at 40°C
Front Panel
Three line display
