GF CNC 4.0 400, Инструкция по эксплуатации

Страница: 3 / 200

Operating instructions CNC 4.0 400/500/630 Table of contents
I
Table of contents
Page
1 About this manual 1
1.1 Warning notice 1
1.2 Other symbols and notices 2
1.3 Abbreviations 2
2 Safety instructions 3
2.1 General safety measures 3
2.2 Working with safety in mind 4
2.3 Disposal 5
3 General 6
3.1 Introduction 6
3.2 Range of application 6
3.3 Copyright 7
4 Product identification and description 8
4.1 Product identification 8
4.2 Product description 8
5 Technical specifications 10
5.1 Available pipe dimensions 11
6 Transport and assembly 14
6.1 Packaging 14
6.2 Sensitivity 14
6.3 Intermediate storage 14
6.4 Scope of delivery 14
7 Fusion preparation 15
7.1 General information 15
7.2 Preparations 15
7.2.1 Connection to the power supply 17
7.3 Touch screen interface 19
7.3.1 Settings of Touch Screen 19
7.3.2 System error 20
7.4 Hoist Lifting Cylinder (only CNC 4.0 630) 20
8 WELDING 22
8.1 Welding according given standards 22
8.1.1 Selection of the welding standard 22
8.1.2 Selection of the pipe diameter 23
8.1.3 Selection of the wall thickness (SDR) 23
8.1.4 Summarization of selected parameters 24
8.2 Preparation 25
8.2.1 Clamp the pipe 25
8.2.2 Position and clamp pipes. 26
8.2.3 Contact position 27
8.2.4 Drag pressure 28
8.2.5 Pipe planing 29
8.2.6 Sliding and Alignment control 33
8.2.7 Clean pipes 35