GF CNC 4.0 400, Инструкция по эксплуатации

Страница: 10 / 200

2 Safety instructions Operating instructions CNC 4.0 400/500/630
4
2.2 Working with safety in mind
“Make your contribution to safety in the workplace."

Report any deviations from normal operation immediately to the
person in charge.

Always keep safety in mind while working.
For your own personal safety as well as for the safe and optimal
handling of the machine, the CNC 4.0 400/500/630 must be installed
correctly.
Connect hydraulic hoses to and from the machine only when the
hydraulic unit is shut off and not under pressure (observe manometer).
Danger of electric shock!
Inspect the electrical cords and devices!
Do not connect damaged cords or devices to the power supply.
Danger of burning!
The heater is hot (220 °C)!
Danger of burning hands on the hot heater.
Do not touch the heater when on.
Danger of burning!

Use the handles on the heater.
To move the heater, use the gloves! (EN 407 321XXX)
Danger of crushing hands!
The machine slide moves!
Danger of injury to hands in the moving machine slide!
Do not reach inside the machine when moving to the end positions.
Danger of cutting hands!
The planer blades are sharp!
Danger of cutting hands on the planer disk.
Do not touch the rotating planer disk.
Danger
Warning
EN 407 321XXX
Warning
Warning