15
3.16
Installing hood stay cable and hood earth
1. Insert the mounting elements (1) for cords (rubber cables) at the left and right in
the front groove (3) of the hood approx. 1 cm from each edge of the runner.
2. Screw on with two pan-head tapping screws DIN 7981 (2) each.
3. Insert the mounting elements (1) for cords (rubber cable) at the left and right in the
groove approx. 2 cm from the edge of the hood.
4. Screw on with two pan-head tapping screws DIN 7981 (2) each.
5. Attach cords (rubber cables) (4) onto the installed mounting elements (1) of the
hood.
6. Knock hood earth cable (5) into the groove (3) of the hood until it is flush.
1
2
1
2
2
1
3
1
4
3
5
At opening width < 1050 mm:
Mount the mounting element on the right under the motor, see Section 3.4.
