8
3.4
Installing geared motor
Geared motor DCU1 (standard)
Geared motor DCU1-2M (FR)
1. Place the geared motor (1) on two sliding blocks at a distance U2 (see block
diagram) from the centre marking and install it with an M6 x 20 Verbus-Ripp
locking bolt.
2. Clamp a foam block (2) under the motor for safety during transport.
Do not hold on to the motor when transporting and installing the drive!
1
1
2
Observe mounting of hood stay cable, see Chapter 3.16.
