getemed VitaGuard VG310, Руководство по эксплуатации, Страница: 78 / 118

78 Information for the doctor and qualified medical staff
9 Information for the doctor and
qualified medical staff
The treating doctor is responsible for monitoring with VitaGuard®.
This also applies to ambulatory monitoring.
This section contains all safety and settings information that only
the treating doctor can make decisions on. Remember that all the
information and instructions in the sections “Intended use” on page
14 and “Safety” on page 18 must also be observed.
Only getemed AG personnel or authorized dealers certified by
getemed AG as medical product advisers in accordance with § 31
MPG (German Medical Products Act) may instruct the doctor and the
qualified medical staff on how to handle and use VitaGuard®. This
certification is awarded only to those persons that have received
adequate training from getemed AG for its products.
9.1 Safety instructions
The safety instructions in this section address special technical and
medical issues that are of particular importance to the doctor and
qualified medical staff.
9.1.1 Preparing for a new patient
When more than one VitaGuard® monitor with differing settings are
used in the same environment, there is a risk of mixing monitors
and a particular patient may be monitored with unsuitable settings.
For this reason check the currently set alarm limits every time the
monitor is switched on.
It is important that VitaGuard® is configured so that false alarms are
avoided to the greatest possible extent. Frequent false alarms can
prove detrimental to the alertness of caregivers.