getemed VitaGuard VG310, Руководство по эксплуатации, Страница: 52 / 118

52 Preparing for SpO
2
monitoring
The LNOP® Adt sensor designed for
adults weighing over 30 kg is
identified by the label illustrated
on the right.
Fig. 29 Label on the LNOP® Adt SpO
2
sensor
The preferred attachment sites on adults are the ring and middle
fingers of the non-dominant hand. Alternative attachment sites are
the other fingers of the non-dominant hand. On immobilized patients
or patients whose hands cannot be used as attachment sites, the big
or middle toe can be used.
1 Open the packaging and remove the
sensor. Hold the sensor with the printed
beige side downwards and bend it back
to draw off the rear side. Align the sen-
sor so that the receiver can be attached
first (Fig. 30).
Fig. 30 Positioning the sensor
2 Now press the receiver on the fingertip
and wrap the adhesive T ends around
the finger (Fig. 31).
Fig. 31 Positioning the receiver on the fingertip
3 Next wrap the sensor with the transmit-
ter and the finger design around the fin-
gernail, and wrap the flaps downwards,
one after the other, around the finger
(Fig. 32).
Fig. 32 Aligning the sensor and receiver