GESTRA SPECTORcontrol, Руководство пользователя

Страница: 33 / 84

33
CAN 1...10 input LRG 1x4x
1. Select a green input field in the menu of the CAN inputs.
2. If a CAN input is already parametrised, a
relevant status screen like this is shown;
in this example the conductivity electrode
LRG 16-40.
3. The setup menu is password protected.
Press and enter your password.
4. To get to the following setup menu, press the
button .
Menus of Inputs/Outputs
continued
1. To enter or change the node ID, select the
green input field. The standard factory setting
is 51. When using more than one LRG 16-40,
a different node ID must be set here and in
the electrode.
2. Use the button Node On/Off to activate or
deactivate the input.
3. To name the CAN inputs, select the green
input field. In the input mask, the on-screen
keyboard can be used to enter or change the
name.
4. To change the range values and limit values,
select the relevant input field.
5. In the input mask, the on-screen keyboard can be used to enter or change the value. The elec-
trode delivers a measured value between 0.5 and 12,000 µS/cm. The range specification is only
relevant for illustrating bar graphs or datalogs.
Note
The settings for the HiHi and LoLo values can be used for alarms and the Hi and Lo val-
ues can be used for switchpoints of 2-position controllers. All limit values can be used as
input parameters in the menu “Logical links”. It is also possible to control digital outputs
with the limit values entered here.
If all values from HiHi to LoLo are set to 0 %, limit value monitoring is deactivated.
If HiHi/LoLo alarms are switched off, no entry is made in the alarm log.
CAN 1...10 input LRG 1x4x setup