Gentner Audio Perfect 400 Скачать руководство пользователя страница 60

Страница: 60 / 80

A P P E N D I C E S •

APPENDIX F: SERIAL PORT COMMANDS

T E CH N I C A L S U P P O RT:

1.800.283.5936 (USA) OR 1.801.975.3760

AGC

This command changes or reports back the state of the AGC for a microphone or line input.

[DEVICE]

AGC

Explanation

<CH>

CH= 1-4

Parameter to apply to the specified microphone channel

CH= A-D

Parameter to apply to the specified line input

CH= *

Parameter to apply command to all microphone channels

<X>

X=0

Parameter to set the state to OFF

X=1

Parameter to set the state to ON

X=2

Parameter to toggle the state from one state to the other (regardless of current state)

X=Null

Parameter to return the current state

Return Values

The command will return the updated condition (On=1, Off=0) of the AGC in the same format as the command.

AMBLVL

This command changes or reports back the setting of the fixed ambient level for each AP400. This value is only used if
adaptive ambient is not enabled.

[DEVICE]

AMBLVL

<X>

Explanation

<X>

X=0 to -70

Parameter to set the ambient level (in dB)

X=Null

Parameter to return the ambient level

Return Values

The command will return the updated ambient level for the selected AP400 in the same format as the command.

BAUD

This command selects or returns the baud rate for the RS232 port on the AP400.

[DEVICE]

BAUD

<X>

Explanation

<X>

X=1

Selects 9,600 baud (bps) rate

X=2

Selects 19,200 baud (bps) rate

X=3

Selects 38,400 baud (bps) rate

X=Null

Parameter to return the baud (bps) rate

Return Values

The command will return the updated condition (1=9,600 baud, 2=19,200 baud, 3=38,400 baud) of the RS232 baud rate in
the same format as the command.

BYE

This command immediately enables password protection when modem mode is active

[DEVICE]

BYE

Note: This command is only applicable to the unit that is connected through the RS232 port.

Содержание Audio Perfect 400

















































































Результаты поиска

Содержание Audio Perfect 400

Отзывы:

Похожие инструкции для Audio Perfect 400

Бренды по названию

Популярные бренды

Gentner Audio Perfect 400, Руководство по установке и эксплуатации

Результаты поиска

Содержание Audio Perfect 400

Отзывы:

Похожие инструкции для Audio Perfect 400

Бренды по названию

Популярные бренды