T E CH N I C A L S U P P O RT:
1.800.283.5936 (USA) OR 1.801.975.3760
I N STA L L AT I O N •
LCD PROGRAMMING
24
Moving Among the Menu Items
Use the
▲
and
▼
buttons to scroll through the menu items at a particu-
lar level. When you reach the last menu item, the display scrolls back
to the beginning of the list, and vice-versa. If you hold down a
▲
/
▼
button, the scrolling speed increases.
To descend a menu level (go deeper into the tree), press ENTER. To
ascend a menu level (go back toward the top of the tree), press ESC.
Switching from One Main Menu Category to Another
To switch between main menu categories, press the
System, Routing,
Outputs, Inputs,
or
Meter
buttons to jump from the present position
within the menu tree to the top level of the target submenu. If the
menu tree is left inactive for a period of time (See Timeout, Page 32),
the LCD reverts to the title screen.
Power-Up Screen
Gentner AP400
Version 2.0
Outputs
Inputs
System
Routing
Meter
Select Preset
Lock Panel
Set Passcode
Device ID
Unit ID
Mixer Mode
Gate Parameters
RS 232
Input 1-4
Input A-D,Telco
Subbus
Output 1-4
Output A-D,Telco
Route to
Outputs 1-4
Route to Telco
Route to
Subbus
Route to
G-Link X,Y,Z
Route to
EC Ref & PA
Input
Output
ERL / TERL
ERLE / TERL
Default Meter
Telco
Route to
G-Link Ref
Route to
Outputs A-D
Figure 13. LCD Menu Tree
ESC BUTTON NOTE:
Pressing ESC at the top of
the tree has no effect.
✍ ✍
