A P P E N D I C E S •
APPENDIX F: SERIAL PORT COMMANDS
T E CH N I C A L S U P P O RT:
1.800.283.5936 (USA) OR 1.801.975.3760
74
RING
This command reports the presence of a Ring on the Telco port. (This is an indication only.)
O
[DEVICE]
RING
Return Value
The Ring is sent if a valid ring has been sensed on the Telco line:
[DEVICE] RING
RXRD
This command controls or reports the Receive Reduction control of the unit.
O
[DEVICE]
RXRD
<X>
Explanation
<X>
X=0
Parameter to set Receive Reduction to OFF
X=1
Parameter to set Receive Reduction to ON
X=2
Parameter to toggle the current state
X=Null
Parameter to report back the current state
Return Values
The command returns the updated connection state of the unit in the same format as the command.
TAMODE
This command controls or reports the Telephone Adapt Mode control of the unit.
O
[DEVICE]
TAMODE
<X>
Explanation
<X>
X=0
Parameter to set Telephone Adapt Mode to Auto
X=1
Parameter to set Telephone Adapt Mode to Burst
X=Null
Parameter to report back the current state
Return Values
The command returns the updated connection state of the unit in the same format as the command.
TE
This command controls or reports the connection status of the unit.
O
[DEVICE]
TE
<X>
Explanation
<X>
X=0
Parameter to set the unit to disconnect from the line
X=1
Parameter to set the unit to connect to the line
X=2
Parameter to toggle the state from one state to the other
X=Null
Parameter to report back the current state
Return Value
If the current state is ON, the following is returned
If the current state is OFF, the following is returned out
out the serial port:
the serial port:
[DEVICE] TE 1
[DEVICE] TE 0
