A P P E N D I C E S •
APPENDIX F: SERIAL PORT COMMANDS
T E CH N I C A L S U P P O RT:
1.800.283.5936 (USA) OR 1.801.975.3760
68
MMAX (cont.)
Return Values
The command will return the updated maximum number of microphones allowed on for the selected AP400 in the same format
as the command.
MPASS
This command sets the current password for modem mode. Note: The default password is a carriage return (enter). If the pass-
word is forgotten, it may be cleared back to a carriage return via the front panel.
O
[DEVICE]
MPASS
<STRING>
Explanation
STRING can be any character combination up to 8 characters. If STRING is not specified the command returns the currently
assigned string. To specify no initialization string, set STRING to "CLEAR"
Return Values
Once the command is given, the unit responds by echoing back the command.
MTRX
This command programs or reports the configuration of a routed input. The data is in a hex format. See the matrix configura-
tion table for specific routing information
O
[DEVICE]
MTRX
<INPUT> <OUTPUTMIX>
Explanation
<INPUT>
INPUT=1-25 Selects the input to be routed to mix outputs
Input
Input word assignment
Input
Input word assignment
1
Mic input 1 post gate
13
Subbus 1
2
Mic input 2 post gate
14
Reserved
3
Mic input 3 post gate
15
G-Link X
4
Mic input 4 post gate
16
G-Link Y
5
Reserved
17
G-Link Z
6
Reserved
18
Mic input 1 pregate
7
Reserved
19
Mic input 2 pregate
8
Reserved
20
Mic input 3 pregate
9
Line input a
21
Mic input 4 pregate
10
Line input b
22
Telco input pregate
11
Line input c
23
Reserved
12
Line input d
24
Reserved
25
Reserved
<OUTPUTMIX>
OUTPUTMIX=hex word
The selected input will be routed to the outputs indicated in
OUTPUTMIX=null
Mix Command to return the current setting for the input.
<OUTPUTMIX>Note:
When entering the hex value of the <OUTPUTMIX>, it is not necessary to add the leading zeros,
only zeros that follow the value, as in examples 1 & 2, next page.
✍ ✍
