Gentner Audio Perfect 400 Скачать руководство пользователя страница 69

Страница: 69 / 80

A P P E N D I C E S •

APPENDIX F: SERIAL PORT COMMANDS

T E CH N I C A L S U P P O RT:

1.800.283.5936 (USA) OR 1.801.975.3760

MHP

This command changes or reports back the state of the high pass filter for a microphone.

[DEVICE]

MHP

Explanation

<CH>

CH= 1-4

Parameter to apply to the specified microphone channel

CH= *

Parameter to apply command to all microphone channels

<X>

X=0

Parameter to set the state to OFF

X=1

Parameter to set the state to ON

X=Null

Parameter to return the current state

Return Values

The command will return the updated condition (On=1, Off=0) of the high pass filter in the same format as the command.

MINIT

This command sets or reports the current setting for the initialization string sent to the modem when in modem mode.

[DEVICE]

MINIT

Explanation

STRING can be any character combination up to 30 characters. If STRING is not specified the command returns the currently
assigned string. To specify no initialization string, set STRING to "CLEAR"

Return Values

The command will return the updated string in the same format as the command was issued.

MLINE

This command changes or reports back how much gain is applied to the microphone input. The three settings are 0dB, 25dB,
and 55dB.

[DEVICE]

MLINE

Explanation

<CH>

CH= 1-4

Parameter to apply to the specified microphone channel

CH= *

Parameter to apply command to all microphone channels

<X>

X=1

Parameter to set the state to 55dB gain

X=2

Parameter to set the state to 25dB gain

X=3

Parameter to set the state to 0dB (line level)

X=Null

Parameter to return the current state

Return Values

The command will return the updated condition of the gain applied in the same format as the command.

MMAX

This command changes or reports back the setting for the maximum number of microphones on each AP400.

[DEVICE]

MMAX

<X>

Explanation

<X>

X=0

Parameter to set the maximum to no limit

X=1-8

Parameter to set the maximum number of microphones allowed on

X=Null

Parameter to return the maximum number of microphones allowed on

Содержание Audio Perfect 400

















































































Результаты поиска

Содержание Audio Perfect 400

Отзывы:

Похожие инструкции для Audio Perfect 400

Бренды по названию

Популярные бренды

Gentner Audio Perfect 400, Руководство по установке и эксплуатации

Результаты поиска

Содержание Audio Perfect 400

Отзывы:

Похожие инструкции для Audio Perfect 400

Бренды по названию

Популярные бренды