A P P E N D I C E S •
APPENDIX F: SERIAL PORT COMMANDS
T E CH N I C A L S U P P O RT:
1.800.283.5936 (USA) OR 1.801.975.3760
57
Serial Command Parameters and Explanations
The flag symbol "
O
" signals the start of a command line. For serial port command protocol and syntax, see page 55.
AA
This command activates and deactivates the auto answer feature.
O
[DEVICE]
AA
<X>
Explanation
<X>
X=0
Parameter disables auto-answer
X=1
Parameter enables auto-answer
X=2
Parameter to toggle the state from one state to the other (regardless of current state)
X=Null
Parameter to report back the current state
Return Values
The command will return the updated condition (On=1, Off=0) of the auto answer in the same format as the command.
AAMB
This command changes or reports back the state of the adaptive ambient for a microphone.
O
[DEVICE]
AAMB
<CH> <X>
Explanation
<CH>
CH= 1-4
Parameter to apply to the specified microphone channel
CH= *
Parameter to apply command to all microphone channels
<X>
X=0
Parameter to set the state to OFF
X=1
Parameter to set the state to ON
X=Null
Parameter to return the current state
Return Values
The command will return the updated condition (On=1, Off=0) of the adaptive ambient in the same format as the command.
AD
This command changes the state of the auto disconnect function.
O
[DEVICE]
AD
<X>
Explanation
<X>
X=0
Parameter to set Auto Disconnect to OFF
X=1
Parameter to set Auto Disconnect to LOOP
X=2
Parameter to set Auto Disconnect to Call Progress (CP)
X=3
Parameter to set Auto Disconnect to LOOP+CP
X=Null
Parameter to report back the current state
Return Values
The command will return the updated connection state of the unit in the same format as the command. If the sent command
changes the state of the unit, the updated state is returned.
If:
command returns:
current disconnect state is OFF
[DEVICE] AD 0
current disconnect state is LOOP
[DEVICE] AD 1
current disconnect state is CP
[DEVICE] AD 2
current disconnect state is LOOP+CP
[DEVICE] AD 3
