Genie Z-80/60, Руководство оператора

Страница: 49 / 65

Sixth Edition • Sixth Printing Operator's Manual
Operating Instructions
Part No. 226482 Z-80/60 47
Drive Enable
Light on indicates that the boom
has moved just past either
circle-end wheel and the drive
function is turned off.
To drive, push the drive enable button or move the
drive enable switch to either side and slowly move
the drive/steer control handle off center.
If the drive/steer control handle is not moved within
two seconds of activating the drive enable. the
drive function will not operate. Release and active
the drive enable again.
Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.
Always use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
Generator (if equipped)
To operate the generator, press the generator
button or move the switch. The indicator light will
come on the engine will continue to run.
Plug a power tool into the power to platform GFCI
outlet.
To turn off the generator, press the generator
button or move the switch. The indicator light will
turn off.
Engine Idle Select (rpm)
Select engine idle (rpm). Push the button or move
the switch. The indicator light next to the current
setting will be on.

Rabbit and foot switch symbol: foot switch
activated high idle

Turtle symbol: low idle

Rabbit symbol: high idle
Check Engine Light (if equipped)
Light on and engine stopped: Tag the
machine and remove from service.
Light on and engine still running:
Contact service personnel within
24 hours.
Platform Overload Indicator Light
Light flashing indicates the
platform is overloaded. The
engine will stop and no functions
will operate.
Remove weight from the platform
until the light goes off and then
restart the engine.