Genie Z-80/60, Руководство оператора

Страница: 37 / 65

Sixth Edition • Sixth Printing Operator's Manual
Inspections
Part No. 226482 Z-80/60 35
43 Slowly move the control handle in the direction
indicated by the yellow triangle on the control
panel OR press the thumb rocker switch in the
direction indicated by the yellow triangle.
Result: The circle-end wheels should turn in
the direction that the blue triangles point on the
drive chassis.
44 Slowly move the drive control handle in the
direction indicated by the blue triangle on the
control panel OR press the thumb rocker
switch in the direction indicated by the blue
triangle.
Result: The circle-end wheels should turn in
the direction that the yellow triangles point on
the drive chassis.
45 Select crab steer. Push the crab
steer button or move the steer mode
switch.
46 Press down the foot switch.
47 Slowly move the drive control handle in the
direction indicated by the blue triangle on the
control panel OR press the thumb rocker
switch in the direction indicated by the blue
triangle.
Result: All wheels should turn in the direction
that the blue triangles point on the drive
chassis.
48 Slowly move the control handle in the direction
indicated by the yellow triangle on the control
panel OR press the thumb rocker switch in the
direction indicated by the yellow triangle.
Result: All wheels should turn in the direction
that the yellow triangles point on the drive
chassis.
49 Select coordinated steer. Push the
coordinated steer button or move
the steer mode switch.
50 Press down the foot switch.
51 Slowly move the drive control handle in the
direction indicated by the blue triangle on the
control panel OR press the thumb rocker
switch in the direction indicated by the blue
triangle.
Result: The square-end wheels should turn in
the direction that the blue triangles point on the
drive chassis. The circle-end wheels should
turn in the direction that the yellow triangles
point on the drive chassis.
52 Slowly move the control handle in the direction
indicated by the yellow triangle on the control
panel OR press the thumb rocker switch in the
direction indicated by the yellow triangle.
Result: The square-end wheels should turn in
the direction that the blue triangles point on the
drive chassis. The circle-end wheels should
turn in the direction that the yellow triangles
point on the drive chassis.