Genie Z-80/60, Руководство оператора

Страница: 29 / 65

Sixth Edition • Sixth Printing Operator's Manual
Controls
Part No. 226482 Z-80/60 27
12 Gasoline/LPG models:Fuel select control with
indicator light
Move the switch or push the button to select
the fuel source. The indicator light next to the
current fuel selection will be on.
13 Platform overload indicator light
Light flashing indicates the platform is
overloaded. The engine will stop and no
functions will operate. Remove weight until the
light goes off and then restart the engine.
14 Power indicator light
Light on indicates the machine is on.
15 Check engine indicator light
Light on indicates an engine fault.
16 Low fuel indicator light
Light on indicates the machine is low on fuel.
17 Fault indicator light
Light on indicates a system fault.
18 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
19 Dual axis proportional control handle for drive
and steer functions
OR Proportional control handle for drive
function and thumb rocker for steer function.
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Move the control handle
in the direction indicated by the blue triangle
and the machine will steer to the left. Move the
control handle in the direction indicated by the
yellow triangle and the machine will steer to
the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Press the left side of the
thumb rocker and the machine will steer to the
left. Press the right side of the thumb rocker
and the machine will steer to the right.
20 Steer mode control with indicator lights
Move the switch or push the button to choose
steer mode. The indicator light next to the
current steer mode will be on.