Genie Z-80/60, Руководство оператора

Страница: 39 / 65

Sixth Edition • Sixth Printing Operator's Manual
Inspections
Part No. 226482 Z-80/60 37
Test the Drive Enable System
63 Press down the foot switch and lower the
boom to the stowed position.
64 Rotate the turntable until the primary boom
moves past one of the circle-end tires.
Result: The drive enable
indicator light should come
on and remain on while the
boom is anywhere in the
range shown.
65 Move the drive control handle off center.
Result: The drive function should not operate.
66 Push the drive enable button or move the
switch and slowly move the drive control
handle off center.
Result: The drive function should operate.
Note: When the drive enable system is in use, the
machine may drive in the opposite direction that
the drive and steer control handle is moved.
Use the color-coded direction
arrows on the platform controls
and the drive chassis to identify
the direction of travel.
If the drive control handle is not moved within two
seconds of moving the drive enable toggle switch,
the drive function will not operate.
Test Limited Drive Speed
67 Press down the foot switch.
68 Raise the primary boom to 10° above
horizontal.
69 Slowly move the drive control handle to the full
drive position.
Result: The maximum achievable drive speed
with the primary boom raised should not
exceed 30 cm/s.
Note: Models with foam-filled tires will travel 12 m
in 40 seconds. Models with high-flotation tires will
travel 12 m in 62seconds.
70 Lower the primary boom to the stowed
position.
71 Extend the boom 1.2 m.
72 Slowly move the drive control handle to the full
drive position.
Result: The maximum achievable drive speed
with the primary boom extended should not
exceed 30 cm/s.
Note: The machine will travel 12 m in 40 seconds.
73 Retract the primary boom to the stowed
position.
74 Raise the secondary boom to 10° above
horizontal.
75 Slowly move the drive control handle to the full
drive position.
Result: The maximum achievable drive speed
with the secondary boom raised should not
exceed 30 cm/s.
Note: Models with foam-filled tires will travel 12 m
in 40 seconds. Models with high-flotation tires will
travel 12 m in 62seconds.
76 Lower the secondary boom to the stowed
position.
If the drive speed with the primary or secondary
boom raised or the primary boom extended
exceeds 30 cm per second, immediately tag and
remove the machine from service.