Genie Z-80/60, Руководство оператора

Страница: 36 / 65

Operator's Manual Sixth Edition • Sixth Printing
Inspections
34 Z-80/60 Part No. 226482
Test the Tilt Sensor Alarm
29 Push a button or move a switch, such as the
engine idle select.
Result: The alarm should sound at the platform
controls.
Test the Foot Switch
30 Push in the platform red Emergency Stop
button to the off position.
31 Pull out the red Emergency Stop button to the
on position and do not start the engine.
32 Press down the foot switch and attempt to start
the engine.
Result: The engine should not start.
33 Do not press down the foot switch and restart
the engine.
Result: The engine should start.
34 Do not press down the foot switch and test
each machine function.
Result: No functions should operate.
Test Machine Functions
35 Press down the foot switch.
36 Activate each machine function control handle,
toggle switch or button.
Result: All functions should operate through a
full cycle.
Test the Steering
(models with 4 wheel steer)
37 Select square-end (blue arrow) steer.
Push the square-end (blue arrow)
steer button or move the steer mode
switch.
38 Press down the foot switch.
39 Slowly move the drive control handle in the
direction indicated by the blue triangle on the
control panel OR press the thumb rocker
switch in the direction indicated by the blue
triangle.
Result: The square-end wheels should turn in
the direction that the blue triangles point on the
drive chassis.
40 Slowly move the control handle in the direction
indicated by the yellow triangle on the control
panel OR press the thumb rocker switch in the
direction indicated by the yellow triangle.
Result: The square-end wheels should turn in
the direction that the yellow triangles point on
the drive chassis.
41 Select circle-end (yellow arrow) steer.
Push the circle-end (yellow arrow)
steer button or move the steer select
switch.
42 Press down the foot switch.