Genie Z-80/60, Руководство оператора

Страница: 25 / 65

Sixth Edition • Sixth Printing Operator's Manual
Controls
Part No. 226482 Z-80/60 23
11 Key switch for off/ground/platform selection
Turn the key switch to the off position and the
machine will be off. Turn the key switch to the
ground position and the ground controls will
operate. Turn the key switch to the platform
position and the platform controls will operate.
12 Engine start button
Push the engine start button and the engine
will start.
13 Engine speed select button
Press the engine speed select button to select
the engine speed. When the arrow above the
rabbit is lit, the engine is in high idle speed.
When the arrow above the turtle is lit, the
engine is in low idle speed.
14 Platform level up/down buttons
Press the platform level up button and the
level of the platform will raise. Press the
platform level down button and the level of the
platform will lower.
15 Jib boom up/down buttons
Press the jib boom up button and the jib boom
will raise. Press the jib boom down button and
the jib boom will lower.
16 Primary boom extend/retract buttons
Press the primary boom extend button and the
primary boom will extend. Press the primary
boom retract button and the primary boom will
retract.
17 20A circuit breaker for system circuit
18 Alarm
19 Bypass/recovery key switch
Bypass key position to be used only to level
the platform if the ground control display
shows platform out of level (P22) and platform
level controls do not work. Refer to the
operating instructions.
Recovery key position should be used only by
trained and authorized personnel.
20 Platform rotate left/right buttons
Press the platform rotate left button and the
platform will rotate left.
Press the platform rotate right button and the
platform will rotate right.
21 High speed function enable button
Press the high speed function enable button to
enable the functions on the ground control
panel to operate at high speed.
22 Primary boom down button
Press the primary boom down button and the
boom will lower.
23 Primary boom up button
Press the primary boom up button and the
boom will raise.