General DataComm SpectraComm SDT, Инструкция по установке и эксплуатации

Страница: 12 / 74

Introduction & Specifications Product Overview
1-4 SpectraComm SDT 076R174-000
Installation and Operation Manual Issue 4
SC-SDT Security
SC-SDT devices are multi-level password-protected and also provide inactivity timers. For periods
of heightened security, authorized users can configure access controls to filter out specific
protocols, such as HTTP, SNMP and/or TFTP access to the unit.
Management
Smart CLI Management
The SC-SDT employs an interactive command line interface that will feel familiar to most field
personnel. Added features include auto-prompting for command arguments, recognition of
abbreviated commands, online help, command line recall and an advanced utility for generating
downloadable ASCII configuration files.
Telnet Management
The SC-SDT provides password-protected Telnet access from anywhere in the network via
Ethernet LAN connection at the rear panel. A customer-supplied router is required at the SC-SDT
location.
Web Management
The SC-SDT supports direct password-protected web management via HTTP for internet-ready
network monitoring. An embedded web server agent allows Read or Read-Write access to the SC-
SDT using popular browsers. To enhance security, the SC-SDT supports web time-outs and
password-protected access over the web interface. HTTP services can also be disabled to block web
access to SC-SDT devices.
SNMP Management
An embedded SNMP agent allows discovery by the SpectraComm Manager (SCM) card, retrieval
of statistics, and alarm traps, and supports SNMP MIB-2 (RFC1213). SNMP access can be disabled
to avoid hacks during intervals of heightened security.
Note
SNMP support does not require a SpectraComm Manager (SCM) co-located in the shelf with the SC-SDT.
TEAM Management
(Future Release)
A future release of the SC-SDT will support auto-discovery and polling by GDCs TEAM software
(Total Enterprise Access Management). TEAM uses HPOV APIs (Application Programmer
Interfaces) to integrate with HP OpenView Windows and other network management applications.
The SC-SDT will also be able to launch a direct Telnet or web-based CLI session from the map
window. For more information on the availability and operation of these additional features, refer
to later issues of this document or contact your GDC Sales Representative.
Note
TEAM support requires an SCM card at version 5.80 or greater and co-located in the shelf with the SC-SDT.
For more information, refer to the GDC TEAM Core documentation and Release Notes.