035)03"-*9
Service Manual
C-4
Gendex Dental Systems 4519-190-71193-7
C.5.1.2
Orthoralix 9200 DDE
To check the alignment of the X-ray field in panoramic mode
proceed as follows:
1.
4XJUDIPOUIFVOJUFOUFSJOHUIF4FSWJDF1SPHSBNT
2.
Select the program
X-ray alignment
and press Dummy Run;
TFMFDUL7N"BOETUIFVOJUJTOPXSFBEZUPNBLF
a static exposure.
3.
Select the panoramic position on the collimator and on the
operator panel.
4.
'JYUIFDPQQFSGJMUFS CTVQQMJFEPOUIFGSPOUQBSUPGUIF%.6
BJOPSEFSUPDPWFSDPNQMFUFMZUIFEJHJUBMTFOTPSCZVTJOH
BEIFTJWFUBQF
5.
Switch on the PC where the Orthoralix 9200 DDE is connected
to.
6.
"DDFTTUPUIF%%&JDPOJOUIFTZTUFNUSBZXIFOPOJUXJUIUIF
DVSTPSPGUIFNPVTFDMJDLXJUIUIFSJHIUNPVTFQVTICVUUPO
four options will be displayed:
t 3FNPUF
t 4FSWJDF
t 3FDPOOFDU
t 1SFWJFX
7.
4FMFDU4FSWJDFCZDMJDLJOHPOJU
8.
Select Static image by cliking on it.
9.
/PXNBLFBOFYQPTVSFBGUFSUIFQSFWJFXUIFGPMMPXJOHXJMM
appear on the monitor:
t BXIJUFSFDUBOHMFDPSSFTQPOEJOHUPUIFEJHJUBMTFOTPS UIF
WFSUJDBMEJNFOTJPOJTDPNQSFTTFE
t BCMBDLSFDUBOHMFDPSSFTQPOEJOHUPUIF9SBZGJFME
t POUIFSJHIUUISFFHSFZTFDUJPOTTIPXJOHUIFQPTJUJPOPG
the X-ray field respect to the digital sensor.
5IFQVSQPTFJTUPIBWFUIFCMBDLSFDUBOHMFJOUIFNJEEMFPG
UIFXIJUFSFDUBOHMFXJUIBXIJUFVOJGPSNVOFYQPTFEBSFB
BMMBSPVOE-PPLBUUIFGPMMPXJOHFYBNQMF
The grey sections may help in understanding the correct
or wrong aligment and how much the lead plate must be
adjusted.
*GBOBEKVTUNFOU IPSJ[POUBMPSWFSUJDBMJTSFRVJSFEQMFBTF
refer to the paragraph
Adjusting the X-ray collimator
of
UIF4FDUJPO'PGUIJT4FSWJDF.BOVBM
10.
*GBEEJUJPOBMFYQPTVSFTBSFOFDFTTBSZDMJDLPO
Stop
and then
on
Static image
.
11.
5PMFBWFUIF
Service
GVODUJPODMJDLPO
Stop
and then on
OK
.
12.
&YJUUIF4FSWJDF1SPHSBNTCZTXJUDIJOHPGGUIFTZTUFN
&
Printed on: 20 Apr 2012, 04:59:40 pm; Printed by: UWE.ZELLER