manualshive.com logo in svg

GEM GSM-19, Инструкция по эксплуатации, Страница: 30 / 149

Поделиться
Скачать
GEM GSM-19 Скачать руководство пользователя страница 30

29 

GSM19 Series Magnetometers - Version 7

 

 
 

 

GEM Systems, Inc. Advanced Magnetometers 

For more technical information, visit www.gemsys.ca 

If the 

base survey mode

 is selected, you see: 

 

SCREEN 6 

survey mode

 

datum time file

 

 

cycle time tuning AC filter 
display mode text ID 

 

       connect sensor now 
089123 readings left 
base 

 

A-start                       C-change  

←

  

 BF

→

 

 

CAUTION: 

Before taking a reading, check to make sure all cables and sensor(s) are 
connected. This maximizes the lifespan of your system and protects internal RF 
circuits from water damage, overheating, etc. 

The active survey mode and the number of readings that could be taken in that mode until the 
memory is full are also indicated on the screen. 

NOTE: 

The mobile menu does not have a setting for the DATUM, and the base does not 
have a setting for POSITION. 

5.3.2 Setting the Positioning System 

From the Survey Menu scroll with B or F to highlight  position. 

 

SCREEN 7 

survey mode 

position 

time file 

 

cycle time tuning AC filter 
display mode text ID   
 
00100N    0000125E 
 

 

A-start                         C-change 

←

 

BF 

→

 

 

When position is highlighted, the unit displays the current position settings.  

To select the positioning system or make changes to the coordinate numbers, press 

 C

-change

. 

Содержание GSM-19






















































































































































Отзывы:

Нет отзывов