GEM GSM-19 Скачать руководство пользователя страница 105 | Manualshive

Страница: 105 / 149

GEM GSM-19 Скачать руководство пользователя страница 105

104

GSM19 Series Magnetometers - Version 7

GEM Systems, Inc. Advanced Magnetometers

For more technical information, visit www.gemsys.ca

APPENDIX D: GPS (GLOBAL POSITIONING SYSTEM) OPTION

At GEM, we address our customer requests for GPS and its higher resolution derivative,
Differential GPS (DGPS) through both built-in and external GPS options. Built-in GPS offers many
advantages because it minimizes weight and removes bulky components that can be damaged
through normal survey procedures.

IMPORTANT NOTES:

The GPS antenna must be connected to the BNC connector MARKED WITH
YELLOW located on the RIGHT HAND SIDE of the console. Do NOT connect
the GPS antenna into the BNC connector for the sensor RF on the left-hand side.
The antenna will be damaged beyond repair.

The GPS antenna MUST be mounted a minimum of one full section staff (56cm)
apart from the sensors to avoid magnetic interference.

D.1 SETTING UP THE GPS

To access the

GPS menu

, press

F-GPS f

rom the

Main Menu

SCREEN D1

A-survey B-diurn.cor
F-GPS
C-info OF-off D-test no
15 II 00
E-time-synch 1-send TU
00:56:56
45-erase 2-enter text

13.2V

Press

C-change

to toggle

GPS

on or off

SCREEN D2

GPS yes

0 bytes

A-send-raw-data F-ok C-change

«
...
103
104
105
106
107
...
»

Содержание GSM-19






















































































































































Отзывы:

Нет отзывов