GEM GSM-19 Скачать руководство пользователя страница 122 | Manualshive

Страница: 122 / 149

GEM GSM-19 Скачать руководство пользователя страница 122

121

GSM19 Series Magnetometers - Version 7

GEM Systems, Inc. Advanced Magnetometers

For more technical information, visit www.gemsys.ca

NOTE:

When GPS is enabled it is not possible to take repeat readings. Each reading is
taken with its UTC time and its coordinates.

If GPS lock is lost during the survey the unit displays:

SCREEN D26

48101.65nT

0.01 99

A - menu other keys – read 12.2
0000268 0001 0002

No GPS

NOTES:

Automatic Grid Setup (line to line navigation) does not display distance to the
destination point.

Other survey modes display the navigation data in a similar fashion.

D.6 DGPS POST PROCESSING

Units equipped with GPS and post-processing option, are capable of storing the binary GPS
information required for the purpose.

When the magnetometer is in reading mode, the required messages from the GPS module are stored
in binary format at the end of the memory block

NOTES:

Since the DGPS information is stored at the end of the memory block, it is
recommended to erase the entire memory before a survey involving DGPS storing
to delete any data from previous surveys.

Two DGPS files are required to perform GPS post-processing. One from a base
GPS station (which could also be the mag base station) and another from the
mobile unit.

To enable or disable post-processing, from the GPS menu press E-post-
processing and conduct the survey in the usual manner.

«
...
120
121
122
123
124
...
»

Содержание GSM-19






















































































































































Отзывы:

Нет отзывов