Gehl PowerBox 1639, Руководство оператора

Страница: 42 / 66

GENERAL INFORMATION
NOTE:
All Service routines, with the exception of
those described under the “Dealer Services” topic
are owner-operator responsibilities. All Operator
Services described under the hourly subtopics
are also referred to on a Decal which is located on
the Engine Cover. Refer to the Lubrication chap-
ter of this manual for lubrication information.
NOTE:
This Service chapter details procedures
to follow for making routine maintenance checks,
adjustments and replacements. The majority of
the procedures are also referred to in both the
Troubleshooting and Maintenance Log chapters
of this manual. For Engine related adjustments
and servicing procedures, BE SURE to refer to
the Engine Manual provided.
This Service chapter details procedures to follow for
making routine maintenance checks, adjustments and
replacements. The majority of the procedures are also
referred to in both the Troubleshooting and
Maintenance Log chapters of this manual. For Engine
related adjustments and servicing procedures, BE
SURE to refer to the separate Engine manual provided.
PRECAUTIONS
Do NOT perform any maintenance or repair without
the owner’s prior authorization. Allow only trained
personnel to service the Paver.
WARRANTY repairs can only be done by a GEHL
Dealer. He will know what portions of the Paver are
covered under the terms of the GEHL Warranty and
what portions are covered by other vendor OEM war-
ranties.
NOTE:
Always dispose of waste lubricating oils,
anti-freeze and hydraulic fluids according to local
regulations or take them to a recycling center for
disposal. Do NOT pour them onto the ground or
into a drain.
DEALER SERVICES
The following areas of internal components service
replacement and operating adjustments should only be
attempted by (or under the direction of) an authorized
GEHL Paver dealer.
ENGINE COMPONENTS
All service routines, related to the internal components
are precise and critical to proper Engine operation.
Special know-how and tools are required for servicing.
NOTE:
If any area of Engine is suspected of
faulty operation, contact your Gehl Paver dealer
for further assistance.
HYDRAULIC SYSTEM COMPONENTS
Valves, Pumps, Motors and Cylinders are also sophis-
ticated assemblies which require special know-how
and tools for servicing. All Cylinders are approprietly
designed with particular strokes, diameters, checks and
hose connection provisions unique to the Paver appli-
cation requirements. A schematic (located at the end of
this chapter) can be used as a guide for troubleshooting
and service reference, as required.
Internal service on any of these components should
only be attempted by (or under the direction of) an
authorized GEHL Paver dealer. WARRANTY repairs
can only be done by a GEHL dealer. He will know
what portions of the Paver are covered under the terms
of the GEHL Warranty and what portions are covered
by other vendor warranties.
Chapter 9
SERVICE & STORAGE
CAUTION
BEFORE proceeding to perform any Service
routines on the Paver, or unless expressly
instructed to the contrary, exercise the
MANDATORY SAFETY SHUTDOWN PROCE-
DURE (Safety chapter). After service has been
performed, BE SURE to restore all Guards,
Shields and Covers to their original positions
BEFORE resuming Paver operation.
907389/AP297
44
Printed In U.S.A.
Discount-Equipment.com