GE iVent 201 1.4, Руководство пользователя

Страница: 213 / 290

Appendix B: Warranty
201
WARRANTY
VersaMed (the Supplier) guarantees the Purchaser the materials and
workmanship used in the manufacture of the iVent
TM
201 ventilator (the Product)
sold to the Purchaser, and will repair any defects which may develop within 12
months from the delivery date to the Purchaser, which are not due to fire,
dampness, willful or accidental damage, or improper use or care, or for reasons
beyond the control of the Supplier. This 12 month warranty does not extend to
expendable items such as membranes, hoses, and filters which are warranted to
be free from defects only at the time of the original delivery.
The express warranties set forth above, specifically exclude defects in the
Products that are (1) caused through no fault of Supplier during shipment to or
from the Purchaser, (2) caused by the use or operation of the Products in any
application or environment other than that instructed, intended or recommended
by the Supplier, (3) caused by modifications or alterations made to the Products
by the Purchaser or any third party, (4) caused by unauthorized maintenance
performed on the Products by the Purchaser or any third party, (5) caused by
failure of the Purchaser to comply with any of the return procedures (6) are the
result of the Products being subjected to unusual physical and / or electrical
stress.
Except for the above express limited warranties or conditions, Supplier makes
and Purchaser receives no warranties in connection with the Products, express
and/or implied and/or statutory, and the Purchaser specifically disclaims any
implied warranty or condition or merchantability or fitness for a particular
purpose. In no event shall the Supplier be liable for any damages, including loss of
profits, incidental or consequential damages, arising out of or in connection with
the use, or inability to use the Products.
Subject to the following, the Purchaser shall send Products with defects that are
covered by this warranty to the Supplier repair center.
The Purchaser shall request a written return authorization from the Supplier prior
to the return of each defective Product for repair or replacement by the Supplier.
Upon request, the Supplier will provide the Purchaser with a Return Goods
Authorization (RGA) number to be prominently displayed on the shipping
container for the defective Products.
Once the Supplier authorizes the return of defective Products, the Purchaser shall
ship such Products to the repair facility, freight and insurance expenses prepaid
in its original container and without relieving the Purchaser from its responsibility
for the shipment. If such defective Products are received by the Supplier during
the applicable warranty period, the Supplier shall, at its sole discretion and
expense, repair or replace such Products, employing at its discretion, new or used
parts or Products to make such repair or replacement, and shall ship the repaired
or replaced Products to the Purchaser.
In any case, and subject to the terms hereof the Supplier be responsible for the
repair of or the replacement of such defective Products only.
Items returned without such approval shall be returned to the Purchaser at its
expense. The Purchaser undertakes that the Products be shipped by a certified
carrier experienced in handling sensitive freight. The Products returned by the
Purchaser for repair or replacement must include a report indicating the type of
failure.